⚡ Rapid revision — the 20-minute version
| Spine | The mark |
|---|---|
| Line types | Thick visible, thin dimension, dashed hidden, chain centre — the alphabet |
| Orthographic | Three aligned views: front/top share width, front/side share height |
| Angles | First angle: top BELOW front; third: ABOVE — read the symbol |
| Pictorial | Isometric 30° axes communicates; orthographic defines |
| Dimensioning | Once, outside, true size — scale shrinks the drawing, never the number |
| Sections | Hatch the cut faces, drop the dashes — clarity is the point |
1. Technical drawing — the universal language of making
Purpose: A drawing communicates EXACTLY what to build — dimensions, shape, material, finish — to someone who will never meet the designer. That is why standards exist (SANS/ISO): a line type or symbol means the SAME thing in Lagos, Nairobi or London. Drawing is a language: line types are its alphabet, views its grammar, dimensioning its numbers — and sloppy grammar builds wrong parts.
Worked: a workshop in one city builds from a drawing made in another — no phone call, no questions. That only works because every dashed line means 'hidden edge' everywhere. 'Why standards?' — unambiguous communication across makers; that sentence is the mark.
2. Equipment and pencil grades
| Tool | Job | Discipline |
|---|---|---|
| T-square + board | Horizontal reference lines | Head against the board edge, ALWAYS |
| Set squares (45°, 30/60°) | Vertical + standard angles | Slide along the T-square blade |
| Compass | Circles and arcs | Needle in the centre mark, tilt consistently |
| Protractor | Angle measurement | Vertex on the point, baseline on the line |
| Pencils H/2H (hard) | Light construction lines | Hard grades for guides you will erase |
| Pencils HB/2B (soft) | Final outlines, shading | Soft grades for lines that STAY |
Construction first, outline second: build the whole view in light hard-grade lines, check it, then firm up the final lines soft-grade. Drawing without light construction is like bricklaying without a string line — confident and wrong.
3. Line types — the alphabet
| Line | Meaning | Used for |
|---|---|---|
| Continuous THICK | Visible edge | Outlines you can see |
| Continuous THIN | Precise but not an edge | Dimension and projection lines |
| Dashed (short dashes) | HIDDEN edge | Edges behind surfaces |
| Chain thin (long-dash-dot) | CENTRE line | Axes of circles and symmetry |
| Chain thick at ends + thin | CUTTING plane | Where a section is taken |
| Wavy continuous thin | BREAK line | Shortened long parts |
Worked: a drilled blind hole shows a circle (visible edge, thick) with a chain centre line through it, and the un-drilled depth as dashed lines. Read the alphabet: thick = real, dashed = hidden, chain = centre. Line-type identification is free marks — learn the six.
4. Orthographic projection — the heart of the subject
Orthographic: A 3D object flattened into 2D VIEWS, each projected at right angles: FRONT (the most informative face), TOP (plan), and one SIDE (end). The views must ALIGN: the top view sits directly above/below the front (shares WIDTH), the side shares HEIGHT with the front and DEPTH with the top. FIRST ANGLE (Europe/Africa): the view is placed on the side you look FROM — the top view goes BELOW the front. THIRD ANGLE (US): view placed on the side you look TOWARD — top goes ABOVE. The projection symbol in the title block declares which.
Worked: a step block — front shows the L-profile, the top shows the step's width and depth, the side confirms heights. Each view alone is incomplete; ALIGNED together they define the object exactly. 'Why three views?' — two leave ambiguity (depth vs height); the third resolves it.
5. Pictorial views — 3D on flat paper
Isometric: ISOMETRIC: the three axes at 120° apart (drawn with the vertical + two at 30° from horizontal) — a true-looking 3D sketch where all edges keep proportion. OBLIQUE: front face drawn true shape, depth lines receding at an angle (usually 45°) — easier when the front is the interesting face. Pictorial views COMMUNICATE; orthographic views DEFINE — drawings pair them: isometric for understanding, orthographic for manufacturing.
Worked: the same step block in isometric shows all three directions at once — instantly readable, awkward to dimension. The orthographic set is dull to read but exact to build from. 'Which view would you give the builder?' — orthographic; 'which for the client?' — pictorial; the pairing is the mark.
6. Dimensioning — the rules that keep it unambiguous
Dimensioning: Each dimension appears ONCE only; place it on the view that shows the feature best; dimension lines sit OUTSIDE the view where possible with THIN lines and neat arrowheads; never dimension to a hidden (dashed) line; never over-dimension (a duplicate contradicts itself). Units are millimetres by default — written once in the title block, not on every number. Figure: 25 not '25 mm'.
Worked: a plate 60 × 40 with a hole — width and length on the top view, hole diameter led by the symbol ⌀ once, positioned from TWO edges (so the machinist can locate it). 'Why locate from two edges?' — position needs two coordinates; one leaves it sliding along the plate.
7. Sectioning — seeing inside
A SECTION view shows the object as CUT by a plane (declared by the chain cutting-plane line with arrows showing the viewing direction). Cut surfaces are HATCHED (thin parallel lines at 45°, evenly spaced — different parts hatched in opposite directions). Hidden dashed lines are OMITTED inside a section — the whole point is to reveal what dashes would clutter. Sections turn invisible interiors into readable faces.
Worked: a hollow pipe in orthographic needs dashed inner walls; sectioned through its axis, the walls become two hatched rectangles — instantly measurable. 'Why section instead of dashed lines?' — clarity; dashes on dashes is unreadable. State the purpose, not just the procedure.
8. Scales — drawing big and small honestly
Scale: FULL SIZE 1:1 — drawing equals object. REDUCTION 1:2 — drawing is HALF the object (a 2 m beam draws at 1 m; every dimension still READS the true size). ENLARGEMENT 2:1 — drawing is TWICE the object (a watch gear). The scale is declared in the title block; dimensions on the drawing are ALWAYS true size regardless of scale — you measure the DRAWING for checking, but you quote the NUMBERS.
Worked: a 3 m door at 1:10 draws at 300 mm, but its dimension line reads '3000'. The scale shrinks the DRAWING, never the NUMBER. 'How long does a 2.5 m wall draw at 1:50?' — 50 mm. Convert via the ratio; quote true size always.
9. CAD — the modern board
| CAD advantage | Why it matters | Board equivalent |
|---|---|---|
| Edit without redrawing | Change one dimension, views update | Full redraw by hand |
| Layers | Dimensions, hatch, outline separate | Overlaid tracing sheets |
| Libraries/blocks | Standard symbols reused | Plastic templates |
| Accuracy + units | Exact coordinates, no scaling drift | Sharp pencil and hope |
| Sharing/plotting | One file, any scale print | One original, couriered |
CAD does not remove the KNOWLEDGE: the software will happily draw an impossible projection or a double-dimensioned view — the draughtsperson still needs first/third angle, line types and dimensioning rules. CAD is a faster pencil, not a replacement for the language.
10. Summary — the technical drawing spine
| Question type | Method beat | Trap |
|---|---|---|
| Line types | Six lines, meanings memorised | Dashed = hidden, chain = centre |
| Views | Front + top + side, ALIGNED | Width shared by front/top; height by front/side |
| First vs third angle | View lands on the side you look FROM (1st) / TOWARD (3rd) | Read the symbol in the title block |
| Isometric | 30° axes, proportional edges | Pictorial communicates; orthographic defines |
| Dimensioning | Once, outside, never to hidden lines | True size always — scale affects the drawing only |
| Sections | Cut plane, hatch cut faces, drop the dashes | Hatching = cut MATERIAL only |
Command discipline: 'draw in good proportion' = light construction lines first; 'project' = shared edges aligned exactly; 'dimension fully' = once, best view, outside; 'state the scale' = ratio + meaning. Technical drawing papers pay for ALIGNMENT and CONVENTION — a beautiful drawing with broken rules is a failed drawing.