⚡ Rapid revision — the 20-minute version
| Spine | The mark |
|---|---|
| Current | I = Q/t — charge flow rate; same everywhere in a series loop |
| Circuits | V = IR; series adds R, parallel: 1/R adds — share current, same V |
| Power | P = VI = I²R — the energy per second |
| Magnetism | Field lines N→S; solenoid = bar magnet you can switch |
| Induction | Changing flux induces EMF (Faraday) — generators and transformers |
| Transformer | AC only; Vp/Vs = Np/Ns; ideal: VpIp = VsIs |
1. Current — charge in motion
Current: Charge flowing per second: I = Q/t, measured in amperes (A) — one ampere is one coulomb of charge per second. CONVENTIONAL current flows + to − (the arrow on circuit diagrams); electrons actually drift − to +. In a SERIES loop the current is the SAME at every point — charge is conserved, and there is nowhere for current to be 'used up'.
Worked: 12 C of charge flows in 4 s → I = Q/t = 12 ÷ 4 = 3 A. Reverse: a 0.5 A torch bulb runs for 60 s → Q = I × t = 30 C. The triangle has three entries — charge, current, time — and any two give the third. Show the substitution: method marks precede answers.
2. Voltage — the push per charge
Potential difference: One volt is one joule per coulomb: V = W/Q — the ENERGY transferred per unit of charge crossing the component. Voltage is not 'used-up current'; it is the push that drives current, and the energy bill each coulomb pays crossing every component.
Worked: 6 C crosses a lamp and transfers 72 J → V = 72 ÷ 6 = 12 V. EMF vs p.d.: the battery's EMF is the total energy per charge it supplies; the p.d. across each component is that energy's share — and in series the shares add back to the EMF exactly.
3. Ohm's law and the I–V graphs
Ohm's law: V = IR for an ohmic conductor at constant temperature — current proportional to voltage, so the I–V graph is a straight line through the origin. Resistance (Ω) measures how hard a component opposes the flow of current.
Non-ohmic components bend the graphs: a FILAMENT LAMP heats as current flows, so its resistance RISES and the curve flattens — the same extra voltage drives less extra current. A DIODE conducts one way only — nothing until the forward threshold, then steep. Matching graph to component is a guaranteed exam item: straight line = fixed resistor, flattening curve = lamp, one-way = diode.
Worked: 12 V across 4 Ω → I = V/R = 3 A. Reverse: a lamp takes 0.25 A at 12 V → R = V/I = 48 Ω. Triangulate: V, I, R — any two give the third, units carried on every line.
4. What changes resistance
Resistance grows with LENGTH (twice the wire, twice the resistance) and falls with cross-sectional AREA (twice the thickness, half the resistance) — a long thin wire resists most. MATERIAL matters (resistivity: copper conducts, nichrome resists — which is why heaters use nichrome), and TEMPERATURE raises a metal's resistance: a hotter lattice shakes more, colliding with the drifting electrons.
Worked: a wire's diameter doubles → its area QUADRUPLES (A = πr²) → resistance falls to a quarter. The area-squared step is the trap: diameter ×2 is area ×4, and the examiner checks whether you squared it.
5. Series circuits — one loop
One loop only: the SAME current everywhere; the supply voltage SHARES across the components (V = V₁ + V₂ + ...); resistances ADD (R = R₁ + R₂). One break — a loose bulb, an open switch — kills the entire loop, which is why old Christmas lights died together.
Worked: 3 Ω and 5 Ω in series on a 12 V battery → R = 8 Ω, I = 12 ÷ 8 = 1.5 A, then V₁ = IR₁ = 4.5 V and V₂ = 7.5 V — the shares sum to 12 ✓. Solve the loop in three beats: total R, then the current, then each voltage share.
6. Parallel circuits — branches
Every branch receives the FULL supply voltage; the supply current SHARES between branches (I = I₁ + I₂); and total resistance FALLS below the smallest branch: 1/R = 1/R₁ + 1/R₂. More branches means more total current and LESS total resistance — the counter-intuitive result every exam tests.
Worked: 6 Ω and 3 Ω in parallel → 1/R = 1/6 + 1/3 = 1/2 → R = 2 Ω (below the smallest, 3 Ω ✓). Houses wire in parallel: every appliance gets full voltage and switches independently — series wiring would dim everything and kill the lot at one fault.
7. Power, energy, and the bills
| Quantity | Formula | Worked |
|---|---|---|
| Power (W) | P = VI | 230 V × 2 A kettle = 460 W |
| Power (W) | P = I²R | 3 A through 4 Ω = 36 W |
| Energy (J) | E = Pt | 460 W for 60 s = 27,600 J |
| Energy (kWh) | 1 kWh = 3.6 MJ | 2 kW heater for 3 h = 6 kWh |
Fuses are rated from the current drawn: a 460 W kettle on 230 V draws 2 A, so a 3 A or 5 A fuse protects it; a 13 A fuse on a 0.5 A lamp never blows and protects nothing. P = VI connects the circuits to the bills — energy = power × time, priced in kilowatt-hours.
8. Magnetism — fields and poles
Field lines run N to S OUTSIDE a magnet, never cross, and bunch where the field is strongest; like poles repel, unlike attract. A plotting compass maps the field line by line. Iron and steel are the magnetic workhorses: iron magnetises temporarily (soft — core material), steel keeps its magnetism (permanent magnets). Induced magnetism: a paperclip touching a magnet becomes a magnet and chains more clips — the field acts at a distance and converts.
9. Electromagnets — fields we switch
Solenoid: A coil of wire: current flows and the field inside is strong and UNIFORM (parallel lines); the coil behaves like a bar magnet with a N and a S end. The right-hand grip rule: grip the coil with your fingers following the current — the thumb points to the N end.
Strength rises with CURRENT, number of TURNS, and a soft-iron CORE — all three in a scrapyard crane. The electromagnetic superpower is switching OFF (a bar magnet cannot): relays, electric bells, circuit breakers, MRI scanners — every one is a switched field doing work.
10. The motor effect — force on a current in a field
Fleming's left hand: A current-carrying wire in a magnetic field feels a FORCE (the motor effect): F = BIL — magnetic flux density (tesla) × current × length of wire in the field. Fleming's LEFT hand: thuMb = Motion (force), First finger = Field (N to S), seCond finger = Current (+ to −). Three perpendicular fingers, one force.
The DC motor: a current-carrying coil in a field turns because opposite sides feel opposite forces — a turning couple. The split-ring COMMUTATOR reverses the current every half turn so the coil keeps spinning the same way; carbon brushes carry the supply in. Speed rises with current, field strength, number of turns, and coil area — the four dials the exam lists.
11. Induction — the generator's law
Electromagnetic induction: Move a wire ACROSS field lines (or a magnet past a coil) and an EMF is induced — cut the lines, induce the push. Fleming's RIGHT hand for generators: Motion, Field, Current. Bigger induction from faster motion, stronger field, and more turns — and the induced EMF reverses when the motion reverses, which is exactly how alternating current is born.
A bicycle dynamo: the coil spins in a field, inducing an alternating EMF — AC unless a commutator rectifies it to DC. The motor and the generator are the same machine read backwards: current in → motion out (motor); motion in → current out (generator). Lenz's direction rule: the induced current OPPOSES the change producing it — conservation of energy wearing a coat.
12. Transformers and the national grid
Transformer: Two coils sharing an iron core: AC in the primary makes a CHANGING magnetic field, which induces a voltage in the secondary — AC only (steady DC gives a steady field: no induction, no output). Vs/Vp = Ns/Np: the turns ratio sets the voltage ratio. Step-up (more secondary turns) for transmission; step-down for the home.
Worked: 230 V on a 1000-turn primary, 100-turn secondary → Vs = 230 × 100/1000 = 23 V (step-down). Assuming 100% efficiency, power in = power out: IpVp = IsVs — the secondary's higher voltage carries proportionally LESS current. Assume the efficiency, state the assumption.
The national grid transmits at very high voltage (hundreds of kV) precisely to make the current SMALL — cable loss is I²R, so quartering the current cuts the losses sixteenfold. Step up to send, step down to sell: the transformer is the reason the grid wastes so little.
13. Summary — the electricity spine
| Question type | Method beat | Trap |
|---|---|---|
| Current, charge | I = Q/t triangle | Conventional + to −; electrons the other way |
| Ohm's law | V = IR with units carried | Lamp curves flatten — non-ohmic |
| Series | Total R → current → shares | One break kills the loop |
| Parallel | 1/R = 1/R₁ + 1/R₂ | Total R falls below the smallest branch |
| Power | P = VI = I²R | Fuse rating follows the current drawn |
| Motor / generator | Left hand motor, right hand generator | Commutator reverses current each half turn |
| Transformer | Vs/Vp = Ns/Np | AC only — steady DC never induces |
Command discipline: 'calculate' = formula, substitution, units; 'explain' = the because-chain (energy per charge, I²R loss, a changing field induces); 'state' = the memorised rule (same current in series, full voltage in parallel). Circuit papers pay method marks — total R first, then current, then shares, and every line shown.