⚡ Rapid revision — the 20-minute version
| Spine | The mark |
|---|---|
| Redox | OIL RIG — Oxidation Is Loss, Reduction Is Gain of electrons |
| Oxidation numbers | The bookkeeping that names what was oxidised |
| Electrolysis | Cathode − reduction, anode + oxidation; molten vs aqueous changes products |
| Cells | Chemical → electrical; electrons flow anode to cathode through the WIRE |
| Electrode potentials | More negative = stronger reductant — the table predicts reactions |
1. Redox — OILRIG, the bookkeeping of electrons
OILRIG: Oxidation Is Loss (of electrons); Reduction Is Gain. Oxidising agents TAKE electrons (they get reduced); reducing agents GIVE electrons (they get oxidised). Track the electrons and every redox equation unravels: Mg + Cu²⁺ → Mg²⁺ + Cu means magnesium oxidised (lost 2e⁻), copper ions reduced (gained 2e⁻) — displacement is redox in disguise.
2. Oxidation numbers — assigning the ledger
| Rule | Value | Worked case |
|---|---|---|
| Uncombined element | 0 | O₂: O = 0; Fe: Fe = 0 |
| Monatomic ion | Its charge | Na⁺ = +1; Cl⁻ = −1; O²⁻ = −2 |
| Oxygen (usually) | −2 (peroxides −1) | H₂O: O = −2; H₂O₂: O = −1 |
| Hydrogen (usually) | +1 (hydrides −1) | HCl: H = +1; NaH: H = −1 |
| Sum of all | 0 (or the ion's charge) | The rule that finds the hidden one |
Worked: MnO₄⁻ — oxygen's four give −8, the ion totals −1, so Mn = +7. SO₄²⁻: O gives −8, ion is −2, so S = +6. HNO₃: H +1, O₃ −6, total 0 → N = +5. Oxidation numbers turn redox into arithmetic: in Cl₂ + 2KBr → 2KCl + Br₂, chlorine goes 0 → −1 (reduced, gain) and bromine −1 → 0 (oxidised, loss). The number change IS the evidence.
3. Half-equations — splitting the story
Every redox equation splits into two half-equations — one for oxidation, one for reduction. Electrons appear as products on the oxidation side, reactants on the reduction side: Mg → Mg²⁺ + 2e⁻; Cu²⁺ + 2e⁻ → Cu. Electrons must BALANCE between the halves (the same number lost and gained) — combine by multiplying where needed.
Worked (with water and acid): MnO₄⁻ → Mn²⁺ in acid solution. Balance O with H₂O: MnO₄⁻ → Mn²⁺ + 4H₂O. Balance H with H⁺: MnO₄⁻ + 8H⁺ → Mn²⁺ + 4H₂O. Balance charge with electrons: left is +7, right is +2 → add 5e⁻ left: MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O. The O/H/charge order is the exam method — three balances, one half-equation.
4. Electrolysis — splitting compounds with electricity
Direct current through a molten or dissolved ionic compound forces its ions to move: positive cations march to the CATHODE (negative — they gain electrons, reduction), negative anions to the ANODE (positive — they lose electrons, oxidation). Label electrodes by electron flow, never by a memorised sign — in cells the signs flip, and the flow is the only reliable guide.
Worked — molten lead bromide: Pb²⁺ reaches the cathode, gains 2e⁻ → grey molten lead metal (Pb²⁺ + 2e⁻ → Pb); Br⁻ reaches the anode, loses e⁻ → pairs into brown bromine vapour (2Br⁻ → Br₂ + 2e⁻). Both observations named, both half-equations written — the full-mark electrolysis answer in one compound.
5. Electrolysis rules — predicting the products
| Solution | Cathode product | Anode product | Because |
|---|---|---|---|
| Concentrated brine (NaCl) | Hydrogen | Chlorine | Less-reactive sodium stays dissolved; concentrated halide beats oxygen |
| Dilute NaCl / sulfate solutions | Hydrogen | Oxygen | Water discharges both ways |
| Copper sulfate (Cu electrodes) | Copper deposits | Anode dissolves | Refining: impure anode feeds pure cathode |
| CuSO₄ (inert electrodes) | Copper | Oxygen | Cu²⁺ less reactive than H₂? no — more, so copper wins; sulfate stays |
Required practical — brine observations: chlorine at the anode bleaches moist litmus (and smells sharp); hydrogen at the cathode gives the squeaky pop with a lit splint; the solution turns alkaline around the cathode (NaOH forms — sodium hydroxide is the third product of the chlor-alkali industry). Copper sulfate with copper electrodes: the anode visibly SHRINKS as it dissolves, the cathode GROWS pure copper, and the blue colour stays (Cu²⁺ consumed = Cu²⁺ released) — refining in a beaker.
6. Industrial electrolysis — aluminium and brine
Aluminium is extracted from molten alumina (Al₂O₃, bauxite) — but its melting point of 2,072 °C would bankrupt any plant, so it dissolves in molten cryolite at ~950 °C: the cryolite lowers the operating temperature, the energy-saving reason every exam wants. Al³⁺ + 3e⁻ → Al at the cathode; oxygen at the carbon anodes burns them away (they must be replaced — the anode reacts: C + O₂ → CO₂). The chlor-alkali industry electrolyses concentrated brine for three products at once: chlorine (water treatment, PVC), hydrogen (fuel, margarine), sodium hydroxide (soap, paper).
7. Electrochemical cells — electricity from chemistry
Flip electrolysis around: a spontaneous redox reaction pushed through a wire IS a current. The zinc-copper cell: zinc (more reactive) oxidises — Zn → Zn²⁺ + 2e⁻ — electrons flow through the wire to the copper half-cell, where Cu²⁺ + 2e⁻ → Cu. A salt bridge completes the circuit by swapping ions between half-cells. The reactivity gap drives the voltage: bigger gap (Mg/Cu), bigger push; similar metals, barely a reading.
Batteries are cells in boxes: dry cells (zinc-carbon, then alkaline), button cells, and rechargeable lithium-ion — where the reaction runs FORWARD on discharge and BACKWARD on charge (electrolysis inside the battery). Fuel cells skip the metal entirely: hydrogen + oxygen → water, electricity as the direct product, water as the only emission — the clean-energy answer with its storage cost.
8. Corrosion and protection — redox in the weather
Rusting: Iron + oxygen + water → hydrated iron(III) oxide. BOTH air and water are required — the classic three-test-tube experiment proves it: dry air (no rust), boiled water sealed with oil (no rust), open water (rusts). Rust is flaky and porous, so it flakes off and exposes fresh iron — unlike aluminium's oxide, which seals and protects.
Protection is redox management: barrier methods (paint, oil, grease — keeping air and water out), sacrificial protection (bolt a MORE reactive metal — magnesium or zinc — to the hull; it oxidises instead of the iron, and is replaced cheaply), and galvanising (zinc-coating — the zinc protects even when scratched, because it is the more reactive partner). Explaining sacrificial anodes is the mechanism question: the more reactive metal loses electrons preferentially — iron becomes the cathode and cannot rust.
9. Summary — the redox spine
| Setting | Electron flow | Energy |
|---|---|---|
| Electrolysis | Forced by the supply: cations gain at cathode, anions lose at anode | Electricity IN |
| Cell / battery | Spontaneous: reactive metal gives, less-reactive ion takes | Electricity OUT |
| Displacement | More reactive metal kicks less from its salt | Heat (often) |
| Corrosion | Iron oxidises with O₂ + H₂O | Metal lost |
Exam trap: in ELECTROLYSIS the anode is positive; in CELLS the signs flip. Never memorise — label by electron flow: loss at the anode ALWAYS (both settings), gain at the cathode ALWAYS. The sign is the variable; the flow is the rule.