⚡ Rapid revision — the 20-minute version
| Spine | The mark |
|---|---|
| Current | I = Q/t — charge flow rate; same everywhere in a series loop |
| Circuits | V = IR; series adds R, parallel: 1/R adds — share current, same V |
| Power | P = VI = I²R — the energy per second |
| Magnetism | Field lines N→S; solenoid = bar magnet you can switch |
| Induction | Changing flux induces EMF (Faraday) — generators and transformers |
| Transformer | AC only; Vp/Vs = Np/Ns; ideal: VpIp = VsIs |
1. Current — charge in motion
2. Voltage — the push per charge
3. Ohm's law and the I–V graphs
Non-ohmic components bend the graphs: a FILAMENT LAMP heats as current flows, so its resistance RISES and the curve flattens — the same extra voltage drives less extra current. A DIODE conducts one way only — nothing until the forward threshold, then steep. Matching graph to component is a guaranteed exam item: straight line = fixed resistor, flattening curve = lamp, one-way = diode.
4. What changes resistance
Resistance grows with LENGTH (twice the wire, twice the resistance) and falls with cross-sectional AREA (twice the thickness, half the resistance) — a long thin wire resists most. MATERIAL matters (resistivity: copper conducts, nichrome resists — which is why heaters use nichrome), and TEMPERATURE raises a metal's resistance: a hotter lattice shakes more, colliding with the drifting electrons.
5. Series circuits — one loop
One loop only: the SAME current everywhere; the supply voltage SHARES across the components (V = V₁ + V₂ + ...); resistances ADD (R = R₁ + R₂). One break — a loose bulb, an open switch — kills the entire loop, which is why old Christmas lights died together.
6. Parallel circuits — branches
Every branch receives the FULL supply voltage; the supply current SHARES between branches (I = I₁ + I₂); and total resistance FALLS below the smallest branch: 1/R = 1/R₁ + 1/R₂. More branches means more total current and LESS total resistance — the counter-intuitive result every exam tests.
7. Power, energy, and the bills
| Quantity | Formula | Worked |
|---|---|---|
| Power (W) | P = VI | 230 V × 2 A kettle = 460 W |
| Power (W) | P = I²R | 3 A through 4 Ω = 36 W |
| Energy (J) | E = Pt | 460 W for 60 s = 27,600 J |
| Energy (kWh) | 1 kWh = 3.6 MJ | 2 kW heater for 3 h = 6 kWh |
Fuses are rated from the current drawn: a 460 W kettle on 230 V draws 2 A, so a 3 A or 5 A fuse protects it; a 13 A fuse on a 0.5 A lamp never blows and protects nothing. P = VI connects the circuits to the bills — energy = power × time, priced in kilowatt-hours.
8. Magnetism — fields and poles
Field lines run N to S OUTSIDE a magnet, never cross, and bunch where the field is strongest; like poles repel, unlike attract. A plotting compass maps the field line by line. Iron and steel are the magnetic workhorses: iron magnetises temporarily (soft — core material), steel keeps its magnetism (permanent magnets). Induced magnetism: a paperclip touching a magnet becomes a magnet and chains more clips — the field acts at a distance and converts.
9. Electromagnets — fields we switch
Strength rises with CURRENT, number of TURNS, and a soft-iron CORE — all three in a scrapyard crane. The electromagnetic superpower is switching OFF (a bar magnet cannot): relays, electric bells, circuit breakers, MRI scanners — every one is a switched field doing work.
10. The motor effect — force on a current in a field
The DC motor: a current-carrying coil in a field turns because opposite sides feel opposite forces — a turning couple. The split-ring COMMUTATOR reverses the current every half turn so the coil keeps spinning the same way; carbon brushes carry the supply in. Speed rises with current, field strength, number of turns, and coil area — the four dials the exam lists.
11. Induction — the generator's law
A bicycle dynamo: the coil spins in a field, inducing an alternating EMF — AC unless a commutator rectifies it to DC. The motor and the generator are the same machine read backwards: current in → motion out (motor); motion in → current out (generator). Lenz's direction rule: the induced current OPPOSES the change producing it — conservation of energy wearing a coat.
12. Transformers and the national grid
The national grid transmits at very high voltage (hundreds of kV) precisely to make the current SMALL — cable loss is I²R, so quartering the current cuts the losses sixteenfold. Step up to send, step down to sell: the transformer is the reason the grid wastes so little.
13. Summary — the electricity spine
| Question type | Method beat | Trap |
|---|---|---|
| Current, charge | I = Q/t triangle | Conventional + to −; electrons the other way |
| Ohm's law | V = IR with units carried | Lamp curves flatten — non-ohmic |
| Series | Total R → current → shares | One break kills the loop |
| Parallel | 1/R = 1/R₁ + 1/R₂ | Total R falls below the smallest branch |
| Power | P = VI = I²R | Fuse rating follows the current drawn |
| Motor / generator | Left hand motor, right hand generator | Commutator reverses current each half turn |
| Transformer | Vs/Vp = Ns/Np | AC only — steady DC never induces |