Gradient, distance, midpoint — from the two points, every time
Circle theorems
Angle at centre = 2× at circumference; angles in same segment equal
SOHCAHTOA
Label opposite/adjacent/hypotenuse FIRST — then pick the ratio
Sine and cosine laws
Sine law: pairs (side/angle). Cosine law: two sides + included angle
Exact values
30/45/60 triangles — derive them, never memorise blind
Vectors
Component form; magnitude by Pythagoras; parallels are scalar multiples
1. Angle rules — name the rule, earn the mark
Angles on a straight line sum to 180°; angles round a point sum to 360°; vertically opposite angles are EQUAL. Parallel lines cut by a transversal: alternate angles equal (Z shape), corresponding angles equal (F shape), co-interior angles sum to 180° (C shape). The NUMBER alone scores nothing — the examiner pays for the RULE named beside it.
Example
Worked: parallel lines with a transversal; one angle is 65°. Alternate (Z): 65°. Co-interior (C): 115°. Corresponding (F): 65°. Write the reason on every line: 'alternate angles are equal' — that phrase is the method mark.
2. Triangles — the family and the sum
Key idea
Angle sum 180°
Every triangle's interior angles sum to 180°. Equilateral: all 60°. Isosceles: two equal sides facing two equal BASE angles. Scalene: no equals. The exterior angle equals the sum of the two opposite interior angles — one line that replaces two steps.
Example
Worked: isosceles with vertex angle 40° → base angles = (180 − 40) ÷ 2 = 70°. Exterior angle: an exterior 110° means the two opposite interiors sum to 110° — no need to find the third interior angle first.
3. Pythagoras — the right-angle test
Key idea
a² + b² = c²
In a RIGHT-ANGLED triangle: the squares of the two shorter sides sum to the square of the hypotenuse (the side OPPOSITE the right angle — the longest). It also runs in reverse: test whether a triangle is right-angled by checking the squares.
Example
Worked: legs 6 and 8 → hypotenuse = √(36 + 64) = 10 (the 3-4-5 family ×2). Reverse: sides 5, 12, 13 → 25 + 144 = 169 = 13² ✓ right-angled. Sides 4, 5, 6 → 16 + 25 = 41 ≠ 36 — not right-angled. The square-test is the two-mark question in disguise.
4. Congruence and similarity — scale factors
Key idea
Similar shapes
Congruent = identical (tests: SSS, SAS, ASA, RHS). Similar = same shape, different size: angles EQUAL, sides in the same RATIO. Find the scale factor k from one pair of matching sides, then scale everything. The trap: AREA scales as k², VOLUME as k³ — never as k.
Example
Worked: similar triangles with a side 3 growing to 6 (k = 2): all sides double, areas ×4, volumes ×8. A cuboid enlarged by k = 3 → volume ×27. The cubed-area question is where marks bleed — quote k² or k³ explicitly.
5. Circle theorems — seven rules, name each
Theorem
Rule
Centre vs circumference
Angle at the centre = 2 × angle at the circumference (same arc)
Same segment
Angles in the same segment are equal
Semicircle
Angle in a semicircle = 90° (Thales)
Cyclic quadrilateral
Opposite angles sum to 180°
Tangent
Tangent meets the radius at 90°
Alternate segment
Angle between tangent and chord = angle in the alternate segment
Chord bisector
Perpendicular from the centre bisects a chord
Example
Worked: a triangle inscribed with one side as the diameter → the angle opposite the diameter is 90° (semicircle theorem). A cyclic quadrilateral with angles 95° and x → x = 85° (opposites sum to 180°). Draw the radius or diameter in — the added line is what unlocks the theorem.
6. Coordinate geometry — the straight line
Key idea
y = mx + c
Gradient m = (y₂ − y₁)/(x₂ − x₁) — rise over run; c = the y-intercept. Parallel lines share the gradient. PERPENDICULAR lines multiply to −1: m⊥ = −1/m (the negative reciprocal — flip and invert). Midpoint = average the coordinates.
Example
Worked: line through (1, 2) and (3, 8): m = (8−2)/(3−1) = 3 → y = 3x + c; sub (1,2): c = −1 → y = 3x − 1. Perpendicular through (1,2): m = −1/3 → y = −x/3 + 7/3. Two lines with gradients 2 and −1/2 are perpendicular: 2 × (−1/2) = −1 ✓.
7. SOH CAH TOA — label the sides FIRST
Key idea
The three ratios
sin θ = opposite/hypotenuse; cos θ = adjacent/hypotenuse; tan θ = opposite/adjacent. Label the sides relative to the GIVEN angle BEFORE choosing the ratio — the labelling IS the method. Invert (sin⁻¹, cos⁻¹, tan⁻¹) to find angles.
Example
Worked: angle 30°, hypotenuse 10, find the opposite: x = 10 × sin 30° = 10 × 0.5 = 5. Find the angle: tan θ = 3/4 → θ = tan⁻¹(0.75) ≈ 36.9°. Right-angled triangles only — for anything else, the next section takes over.
8. The sine and cosine laws — any triangle
Law
Equation
Use when
Sine law
a/sinA = b/sinB = c/sinC
Two angles + a side, or two sides + a NON-included angle
Cosine law
a² = b² + c² − 2bc·cosA
Two sides + the INCLUDED angle, or all three sides (find an angle)
Example
Worked — cosine law: b = 5, c = 7, A = 60° → a² = 25 + 49 − 2(5)(7)(0.5) = 39 → a ≈ 6.24. Worked — sine law: a = 6, A = 40°, B = 65° → b = 6 sin 65°/sin 40° ≈ 8.5. Right-angled? The laws fall back to Pythagoras and SOH CAH TOA — cos 90° = 0 kills the cross term.
9. The unit circle — exact values
Key idea
Coordinates as trig
On the unit circle, a point at angle θ has coordinates (cos θ, sin θ) — trigonometry is geometry on a circle. The exact values are exam currency: sin 30° = 1/2, sin 45° = √2/2, sin 60° = √3/2; cos mirrors them; tan 30° = 1/√3, tan 45° = 1, tan 60° = √3.
Example
Worked: sin 150° = sin 30° = 1/2 — the second quadrant keeps sine positive (ASTC: All-Sine-Tan-Cos going anticlockwise). cos 120° = −1/2 (cosine negative in the second quadrant). The quadrant sign is the trap — the CAST diagram decides it.
10. Areas — every formula, one table
Shape
Area
Worked
Triangle
½ × base × height (or ½ab sinC)
b = 8, h = 5 → 20
Trapezium
½(a + b)h
a = 4, b = 8, h = 5 → 30
Circle
πr²
r = 6 → 36π ≈ 113.1
Sector
(θ/360) × πr²
θ = 60°, r = 6 → 6π ≈ 18.8
Arc length
(θ/360) × 2πr
θ = 60°, r = 6 → 2π ≈ 6.28
½ab sin C is the angle-between-two-sides formula — no height needed, the sine supplies it. Sector and arc are fractions of the circle: the angle over 360 scales both.
11. Vectors — magnitude, direction, proof
Key idea
Vector basics
A vector is a displacement: magnitude AND direction (column form (x, y) or i + j notation). Magnitude |a| = √(x² + y²) — Pythagoras on the components. Add nose-to-tail (components add); parallel vectors are SCALAR MULTIPLES of each other — that is the proof of collinearity.
Example
Worked: a = (3, 4) → |a| = √(9 + 16) = 5 (the 3-4-5 triangle again — it is everywhere). Prove A, B, C are collinear: show AB = k·BC for some scalar k — same direction, same line. Vectors (2, 3) and (−4, −6): multiples (× −2) — parallel, opposite direction.
12. Transformations — describe them precisely
The four transformations: REFLECTION (mirror line), ROTATION (centre + angle + direction), TRANSLATION (a vector), ENLARGEMENT (centre + scale factor). A complete description is the mark: 'rotation of 90° anticlockwise about (0,0)' — all three parts. Enlargement with a NEGATIVE factor flips AND scales (k = −1 is a 180° rotation) — the trap that catches half the class.
Example
Worked: reflect (3, 5) in the line y = x → swap the coordinates: (5, 3). Translate by (2, −1) → add the vector: (5, 4). Enlarge (1, 1) by k = 3 about the origin → (3, 3); by k = −1 → (−1, −1). Invariant points stay fixed (the centre of rotation, points on the mirror line).
13. Summary — the geometry spine
Question type
Method beat
Trap
Angles
Name the rule on every line
The number alone scores nothing
Pythagoras
Square-test both directions
Hypotenuse is opposite the right angle
Similarity
k for sides, k² area, k³ volume
The squared/cubed factor
Circle theorems
Draw the radius/diameter in
Name the theorem
Perpendicular
m × m⊥ = −1
Flip AND invert
Trig
Label sides first, then the ratio
Right-angled only — SOH CAH TOA
Sine/cosine laws
Included angle → cosine law
Sine law's ambiguous case
Vectors
Scalar multiple = collinear proof
Magnitude is Pythagoras
Note
Command discipline: 'calculate' = formula, substitution, units; 'prove' = the named theorem or the scalar-multiple line, stated as such; 'describe' = every part (centre, angle, direction / centre, factor). Geometry papers pay the reasons — an unexplained angle is a wrong angle.
Spotted a problem with this content? Sign in to send it to our editors.