⚡ Rapid revision — the 20-minute version
| Spine | The mark |
|---|---|
| Redox | OIL RIG — Oxidation Is Loss, Reduction Is Gain of electrons |
| Oxidation numbers | The bookkeeping that names what was oxidised |
| Electrolysis | Cathode − reduction, anode + oxidation; molten vs aqueous changes products |
| Cells | Chemical → electrical; electrons flow anode to cathode through the WIRE |
| Electrode potentials | More negative = stronger reductant — the table predicts reactions |
1. Redox — OILRIG, the bookkeeping of electrons
2. Oxidation numbers — assigning the ledger
| Rule | Value | Worked case |
|---|---|---|
| Uncombined element | 0 | O₂: O = 0; Fe: Fe = 0 |
| Monatomic ion | Its charge | Na⁺ = +1; Cl⁻ = −1; O²⁻ = −2 |
| Oxygen (usually) | −2 (peroxides −1) | H₂O: O = −2; H₂O₂: O = −1 |
| Hydrogen (usually) | +1 (hydrides −1) | HCl: H = +1; NaH: H = −1 |
| Sum of all | 0 (or the ion's charge) | The rule that finds the hidden one |
3. Half-equations — splitting the story
Every redox equation splits into two half-equations — one for oxidation, one for reduction. Electrons appear as products on the oxidation side, reactants on the reduction side: Mg → Mg²⁺ + 2e⁻; Cu²⁺ + 2e⁻ → Cu. Electrons must BALANCE between the halves (the same number lost and gained) — combine by multiplying where needed.
4. Electrolysis — splitting compounds with electricity
Direct current through a molten or dissolved ionic compound forces its ions to move: positive cations march to the CATHODE (negative — they gain electrons, reduction), negative anions to the ANODE (positive — they lose electrons, oxidation). Label electrodes by electron flow, never by a memorised sign — in cells the signs flip, and the flow is the only reliable guide.
5. Electrolysis rules — predicting the products
| Solution | Cathode product | Anode product | Because |
|---|---|---|---|
| Concentrated brine (NaCl) | Hydrogen | Chlorine | Less-reactive sodium stays dissolved; concentrated halide beats oxygen |
| Dilute NaCl / sulfate solutions | Hydrogen | Oxygen | Water discharges both ways |
| Copper sulfate (Cu electrodes) | Copper deposits | Anode dissolves | Refining: impure anode feeds pure cathode |
| CuSO₄ (inert electrodes) | Copper | Oxygen | Cu²⁺ less reactive than H₂? no — more, so copper wins; sulfate stays |
6. Industrial electrolysis — aluminium and brine
Aluminium is extracted from molten alumina (Al₂O₃, bauxite) — but its melting point of 2,072 °C would bankrupt any plant, so it dissolves in molten cryolite at ~950 °C: the cryolite lowers the operating temperature, the energy-saving reason every exam wants. Al³⁺ + 3e⁻ → Al at the cathode; oxygen at the carbon anodes burns them away (they must be replaced — the anode reacts: C + O₂ → CO₂). The chlor-alkali industry electrolyses concentrated brine for three products at once: chlorine (water treatment, PVC), hydrogen (fuel, margarine), sodium hydroxide (soap, paper).
7. Electrochemical cells — electricity from chemistry
Flip electrolysis around: a spontaneous redox reaction pushed through a wire IS a current. The zinc-copper cell: zinc (more reactive) oxidises — Zn → Zn²⁺ + 2e⁻ — electrons flow through the wire to the copper half-cell, where Cu²⁺ + 2e⁻ → Cu. A salt bridge completes the circuit by swapping ions between half-cells. The reactivity gap drives the voltage: bigger gap (Mg/Cu), bigger push; similar metals, barely a reading.
Batteries are cells in boxes: dry cells (zinc-carbon, then alkaline), button cells, and rechargeable lithium-ion — where the reaction runs FORWARD on discharge and BACKWARD on charge (electrolysis inside the battery). Fuel cells skip the metal entirely: hydrogen + oxygen → water, electricity as the direct product, water as the only emission — the clean-energy answer with its storage cost.
8. Corrosion and protection — redox in the weather
Protection is redox management: barrier methods (paint, oil, grease — keeping air and water out), sacrificial protection (bolt a MORE reactive metal — magnesium or zinc — to the hull; it oxidises instead of the iron, and is replaced cheaply), and galvanising (zinc-coating — the zinc protects even when scratched, because it is the more reactive partner). Explaining sacrificial anodes is the mechanism question: the more reactive metal loses electrons preferentially — iron becomes the cathode and cannot rust.
9. Summary — the redox spine
| Setting | Electron flow | Energy |
|---|---|---|
| Electrolysis | Forced by the supply: cations gain at cathode, anions lose at anode | Electricity IN |
| Cell / battery | Spontaneous: reactive metal gives, less-reactive ion takes | Electricity OUT |
| Displacement | More reactive metal kicks less from its salt | Heat (often) |
| Corrosion | Iron oxidises with O₂ + H₂O | Metal lost |