Learning outcomes
By the end of this lesson you should be able to: describe the four classes of acute haemorrhage and their recognition; state the features that distinguish haemorrhagic shock from other types; outline the initial management of a bleeding patient; describe what blood products are used for and the thresholds that trigger them; and calculate the maintenance and resuscitation fluid requirements for a surgical patient.
Prerequisites
Lessons 1-2, and PATH 201 module 1 (haemodynamic disorders) and PHYS 101 (cardiovascular physiology). Haemorrhagic shock is the disturbance of circulation that you learned about, produced by a surgical loss of volume.
The big idea
Bleeding is the commonest cause of shock in a surgical patient and the one in which a delay in the first action is most likely to be fatal. The class of haemorrhage is a shorthand for how far the compensation has gone, and it tells you what the patient will look like and how urgently they need blood.
The classes of haemorrhage
| Class | Volume lost | Clinical picture |
|---|---|---|
| Class I | Under 15 per cent of blood volume | Minimal symptoms; a slight tachycardia; normal pulse pressure and breathing rate |
| Class II | 15 to 30 per cent | Tachycardia; narrowed pulse pressure; anxiety; breathing rate normal or slightly raised; urine output preserved |
| Class III | 30 to 40 per cent | Tachycardia with a widened or narrow pulse pressure; hypotension; altered mental state; oliguria; breathing rate raised |
| Class IV | Over 40 per cent | Lethargy; marked hypotension; minimal urine output; the patient requires immediate surgery and blood |
Note that the compensatory tachycardia is the change that appears first, and that a normal heart rate does not exclude a class III haemorrhage in a patient taking a beta-blocker, in whom the compensatory tachycardia is blocked. The pulse pressure narrows before the systolic pressure falls, because the vasoconstriction that compensates raises the diastolic before the systolic has been affected at all. By the time the systolic pressure falls, the patient has exhausted the compensation.
Worked example: the initial management of bleeding
| Step | Action | Purpose |
|---|---|---|
| Resuscitation | Give high-flow oxygen, two wide-bore intravenous cannulae, and take blood for cross-matching, full blood count, coagulation and biochemistry | To maintain oxygenation while the volume is restored, and to know what the patient's starting state was |
| Volume | Give warmed crystalloid (30 millilitres per kilogram) while waiting for blood | The initial restoration of the circulating volume, with the risks of over-hydration recognised |
| Blood | Transfuse red cells for haemodynamic instability with a haemoglobin below 7 to 8 grams per decilitre; use platelets, plasma and cryoprecipitate as the clotting parameters fall | To restore both the volume and the oxygen-carrying capacity, and to treat the coagulopathy that develops |
| Damage control | Stop the bleeding by radiological embolisation or surgical control, and keep the patient warm and oxygenated | To remove the cause, because transfusion alone will not stop the bleeding |
Massive transfusion — the replacement of one blood volume within twenty-four hours, or the transfusion of ten units of red cells in an adult — carries the risks of dilution of the clotting factors, of hypothermia from cold products, of acidosis from the ongoing shock, and of hyperkalaemia from stored blood. The lethal triad of hypothermia, acidosis and coagulopathy feeds on itself, and this is the cycle that a modern massive transfusion protocol interrupts by giving red cells, plasma and platelets in a fixed ratio of one to one to one rather than transfusing red cells alone and then rebuilding the clotting after.
Why does the pulse pressure narrow before the systolic blood pressure falls in haemorrhagic shock?
Fluids in the surgical patient
| Situation | Approach |
|---|---|
| Maintenance | Hourly rate from weight (4 ml/kg for the first 10 kg, 2 for the next 10, 1 for the rest), with replacement of measured losses |
| Resuscitation | Warmed crystalloid 30 ml per kilogram for hypotension or a raised lactate, with a reassessment after each bolus |
| Hypotonic versus isotonic | 0.9% saline is a balanced replacement in most surgical states; balanced crystalloids are often preferred where large volumes are given, because of the chloride load |
| Post-operative | Replace measured losses (drains, urine, nasogastric output) plus the maintenance, with the electrolytes and acid-base checked rather than assumed |
Watch outThe most common fluid error in surgery is over-resuscitation with unbalanced crystalloid, which produces a chloride-driven metabolic acidosis that delays recovery and can be misread as a deterioration of the underlying condition. Reassess after each bolus, and let the measured values and the end-points (heartrate, blood pressure, urine output, lactate) define the endpoint.
Common mistakes
Watch outSaying a normal blood pressure excludes haemorrhagic shock. The compensation (a tachycardia and vasoconstriction) keeps the pressure near-normal until the compensation is exhausted, and a patient on a beta-blocker may not even have the tachycardia.
Watch outTransfusing blood to a fixed haemoglobin number regardless of the patient. Transfusion is for instability or symptoms, with a threshold of about 7 grams per decilitre in most stable patients and higher in patients with active coronary disease.
Watch outTransfusing red cells alone in a massive transfusion. Coagulopathy, hypothermia and acidosis develop, so red cells, plasma and platelets are given in a fixed ratio rather than sequentially.
Check your understanding
How do you estimate the severity of a haemorrhage at the bedside?
Why is the lethal triad called the lethal triad?
When is blood given to a bleeding surgical patient?
Multiple choice
Which clinical feature appears first in haemorrhagic shock?
Which is a feature of the compensatory tachycardia in a haemorrhaging patient?
What is the commonest cause of shock in a surgical patient?
What is the target of the fluid resuscitation of a bleeding patient?
What is the immediate priority in a bleeding patient?
Summary and next
Haemorrhagic shock is the commonest shock in surgical practice, and the class of haemorrhage is a shorthand for how far the compensation has been driven. The tachycardia and the narrow pulse pressure appear before the systolic falls, so a normal pressure does not exclude a class III bleed. Resuscitation gives oxygen, access, warmed crystalloid and blood in a fixed ratio, and the priority at each step is to restore perfusion and then to stop the bleeding, because transfusion alone will not do it.
Next: wound care and healing, where the principles of the pathology course are applied to the wound you make in theatre, and to the complications of that wound afterwards.