Learning outcomes
By the end of this lesson you should be able to: describe the fluid mosaic model and state what the two words mean; explain how temperature, cholesterol and fatty acid composition control membrane fluidity; list the five principal membrane proteins and say what each contributes to; state which small molecules cross the membrane alone and which cannot; explain the mechanism and the energetics of the sodium-potassium ATPase; distinguish simple from facilitated diffusion and give a specific example of each; and predict what happens to a cell placed in a hypertonic, hypotonic or iso-tonic solution.
Prerequisites
Lesson 2 (transport across cell membranes) from Module 1 for the transport categories, and Lesson 7 for the phospholipid whose amphipathic character makes the membrane possible.
The big idea
One image holds the whole of the model: a thin sea of fat with icebergs in it. The sea is the double layer of phospholipid, the icebergs are the proteins, and the sea can flow, so the icebergs can drift and meet. That is why insulin receptors cluster, why a vesicle can fuse with the membrane, and why a cell can change shape without tearing itself apart.
| Component | Proportion | Contribution |
|---|---|---|
| Phospholipids | The majority by mass | The double layer itself, which forms the barrier |
| Cholesterol | About one molecule for every two phospholipids | Moderates the fluidity in both directions, stiffening a warm membrane and loosening a cold one |
| Proteins | About half the mass in most membranes | Transport, receptors, enzymes, cell identity and anchors |
| Glycolipids and glycoproteins | A small fraction on the outer surface only | Cell recognition, and the ABO blood group antigens |
Worked example: fluidity is a controlled variable
The fluidity of the membrane is not a happy accident; it is actively regulated, and the reasons are the ones you have already learned. A membrane that is too rigid stops its proteins from moving, so receptors cannot cluster and transport slows. A membrane that is too fluid leaks its gradients, so the cell cannot hold its contents.
| Factor | Effect on fluidity | Mechanism |
|---|---|---|
| Temperature | A rise increases fluidity, a fall decreases it | Heat gives the fatty acid tails energy to move; cold makes them settle in order |
| Unsaturation | More cis double bonds increase fluidity | The kink in the chain prevents orderly packing of the tails |
| Chain length | Shorter chains increase fluidity | Fewer van der Waals contacts hold the bilayer together |
| Cholesterol | Reduces fluidity when warm, increases it when cold | The rigid ring sits between the tails and restrains them, while its bulk stops the tails packing when cold |
| Sphingolipids | Decrease fluidity | Their straighter saturated chains pack tightly, forming lipid rafts |
NoteThe double action of cholesterol is the part worth pausing on: it is a fluidity buffer, not simply a stiffener. It keeps the membrane from becoming either too fluid at body temperature or too rigid at a lower one, which is part of why the cholesterol concentration of the membrane is so tightly controlled.
The membrane proteins
| Class | Example | Function |
|---|---|---|
| Channel | The potassium leak channel, the aquaporin | Allows one solute or water to move passively down a gradient |
| Carrier (transporter) | The glucose transporter GLUT1, the chloride bicarbonate exchanger | Binds a solute on one side, changes shape and releases it on the other |
| Pump | The sodium-potassium ATPase, the calcium ATPase | Uses ATP directly to move a solute against its gradient |
| Receptor | The insulin receptor, the beta adrenergic receptor | Binds a messenger on the outside and signals on the inside |
| Enzyme | Adenylate cyclase, the sodium hydrogen exchanger | Catalyses a reaction at the membrane surface |
| Structural and junctional | Integrins and cadherins, the tight junction proteins | Attach the cell to its neighbours and to the matrix, and seal the space between cells |
What crosses, and what cannot
The double layer is a barrier to everything charged and to most things large, and that is exactly why a cell is a cell. Test the rule against the small molecules of the body.
| Solute | Crosses freely? | Reason | Consequence |
|---|---|---|---|
| Oxygen and carbon dioxide | Yes | Small and non-polar, so they dissolve in the lipid | Gas exchange across the alveolar and placental barrier needs no transporter |
| Water | Yes, slowly, and rapidly through aquaporins | Small and uncharged | Cells are always near osmotic equilibrium with their surroundings |
| Ethanol and urea | Yes | Small and uncharged | Urea equilibrates across membranes, which is why it is an ineffective osmole |
| Glucose | No | Large and polar, and its hydroxyls hydrogen bond with water | Needs a specific transporter, which is why diabetes is a transporter defect as well as a hormonal one |
| Sodium and potassium | No | Charged | The gradient is what every action potential and every pump depends on |
| Proteins | No | Very large | Plasma proteins give the oncotic pressure, because they are trapped on one side |
| Hydrogen ions | No | Charged | pH can be held different in two compartments, which is the basis of the bicarbonate buffer's open system |
Worked example: the pump that builds the gradients
The sodium-potassium ATPase is the most important protein in this whole module, and worth a worked example. It cycles through two conformations and, in each full cycle, moves three sodium out and two potassium in, using one ATP. The stoichiometry is fixed and fixed for a reason.
| Step | What happens | Energy or consequence |
|---|---|---|
| Binding from inside | It binds three sodium ions on the cytoplasmic side | Sets the stoichiometry |
| Phosphorylation | ATP donates a phosphate to an aspartate on the pump, changing its shape | One ATP per cycle |
| Release outside | The shape change opens the exterior face and releases the three sodium | Moves sodium against a steep gradient |
| Binding from outside | It now binds two potassium ions on the exterior side | Sets the counter stoichiometry |
| Dephosphorylation | The phosphate is lost, the shape reverts, and the potassium is released inside | The two ions enter against their gradient |
Because three positive charges leave and only two enter, the pump is electrogenic: it drives a net positive charge out of the cell, contributing a few millivolts to the inside-negative resting potential. That contribution is small, but it is not zero, which is worth remembering when you add up the contributions to the minus seventy millivolts you learned in Module 1.
Simple and facilitated diffusion
| Class | Driving force | Specificity | Saturable | Example |
|---|---|---|---|---|
| Simple diffusion | The concentration gradient alone | No, any small non-polar solute | No, rate rises linearly with concentration | Oxygen into the tissues |
| Facilitated diffusion | The concentration gradient alone | Yes, the channel or carrier only accepts one solute | Yes, all binding sites occupied gives a maximum rate | GLUT1 moving glucose into a resting muscle cell |
NoteSaturation is the feature that separates facilitated from simple diffusion, and it is what makes a transporter a drug target. The glucose transporter is saturated at high blood glucose, which is the reason kidney reabsorption of glucose has a transport maximum, and the reason glucose appears in the urine once it is exceeded.
A patient with a transport maximum defect reabsorbs no glucose in the kidney. What is the direct consequence, and which cellular mechanism is at fault?
Tonicity
Tonicity is a word that catches almost everyone out, and the reason is worth spelling out. Osmolarity counts every dissolved particle; tonicity counts only the ones that cannot cross. A saline solution and a urea solution at the same osmolarity will not have the same tonicity, because urea crosses a cell membrane freely and settles on both sides, so it holds no water on either side.
| Solution | Osmolarity versus the cell | What happens | Example |
|---|---|---|---|
| Isotonic | Equal effective osmolarity | The cell keeps its volume and its shape | 0.9 per cent saline, 5 per cent glucose |
| Hypotonic | Fewer non-penetrating solutes than the cell | Water enters and the cell swells, and may lyse | Distilled water |
| Hypertonic | More non-penetrating solutes than the cell | Water leaves and the cell shrinks and crenates | 3 per cent saline |
NoteThe normal saline solution given intravenously is 0.9 per cent, and the figure is not arbitrary: it is the concentration that is isotonic to human plasma. Giving water intravenously instead would lyse red cells; giving 3 per cent saline is a deliberate treatment for cerebral oedema.
Common mistakes
Watch outSaying a cell placed in isotonic urea swells and bursts. It does not, because urea is freely penetrating, so it equilibrates across the membrane and exerts no lasting osmotic force. A solution can be iso-osmotic and still be hypo- or hypertonic.
Watch outForgetting that the pump is not the only thing that makes the resting potential. It contributes a few millivolts directly; the minus seventy millivolts comes mostly from the potassium leak through open channels, as Lesson 3 set out.
Watch outSaying facilitated diffusion saturates but simple diffusion does not. That is right, but the saturation is why the rate of a facilitated process reaches a maximum that a simple one never does — which is what makes a carrier the rate limiting step of a pathway.
Check your understanding
Explain the two words in the fluid mosaic model.
State the stoichiometry of the sodium-potassium ATPase and explain why the third positive charge matters.
A red cell is placed in iso-osmolar urea and bursts. Explain, using the concept of penetrating and non-penetrating solutes.
Multiple choice
Which statement correctly describes the effect of cholesterol on a cell membrane?
Which solute cannot cross the plasma membrane by simple diffusion?
What is the stoichiometry of the sodium-potassium ATPase per cycle?
Which feature distinguishes facilitated diffusion from simple diffusion?
A red cell is placed in a solution that is iso-osmotic but contains only urea, which crosses the membrane freely. What happens?
Which statement about the membrane is correct?
Summary and next
The membrane is a fluid mosaic of phospholipid with proteins scattered through it, and its fluidity is controlled by three things at once — temperature, chain unsaturation and cholesterol, which is a buffer rather than a simple stiffener. The double layer excludes every charged and every large molecule, so nothing the cell needs can cross freely except oxygen, carbon dioxide and water, and everything else depends on the membrane's proteins. The sodium-potassium ATPase builds the sodium and potassium gradients with a fixed three-out, two-in stoichiometry, and everything else in physiology rides on gradients it made.
Next: the other organic compounds of the body. You will meet the vitamins and the trace elements, which are the smallest quantities of material in the whole of nutrition and the ones whose absence is most disabling.